AC Install
AC Install
Since 1973, Palma Air Conditioning has assisted Florida homes, and to date, it has served over 350,000 happy clients. In order to maintain their skills, our air conditioner repair professionals undergo daily air conditioner repair training in addition to receiving specialized training.
Every member of our staff keeps up to date on the newest advancements and technological advances in air conditioner repair. Palma Air Conditioning is aware of how annoying it can be when an air conditioner breaks down, particularly given the warm weather in South Florida.
We provide free estimates to all of our clients, which include an assessment of the problem’s cause and an estimate of the price of any necessary air conditioner repairs.
Learn More About Getting A New AC Unit In South Florida
Putting in a fresh air conditioning system isn’t always a speedy task. Some folks assume it’s just a matter of slapping in the outdoor and indoor units and calling it a day. But it’s often more complicated than that. It depends on factors like the size and age of your old unit, its location, and whether additional components like ductwork or an outside pad are needed.
When you’re in the market for a new air conditioner, it’s helpful to know how much time the installation might take, what the process involves, and what steps you can take to ensure your new unit operates efficiently. Here’s a brief rundown of what to anticipate.
Start With an In-Home Visit and Estimation
What Happens on the Installation Day?
On the day of installation, you’ll have a discussion with the installation team to review the process. You’ll get acquainted with everyone involved before the project commences.
The first step is removing the old AC unit. A certified installer will cut off the electricity by switching off the circuit breaker in accordance with EPA guidelines. Then, someone with EPA certification will handle the removal. Following this, all electrical wiring will be disconnected. If there’s no existing disconnect box, one may need to be installed.
Once the wiring is disconnected, the old unit can be taken out, clearing the space for the new system installation. Since modern AC units might have different dimensions compared to the old one, the pad supporting the exterior unit might require replacement. Additionally, leveling of the ground may be necessary.
At this stage, the installers transition indoors. They begin by disconnecting the indoor evaporator coil. Removing the evaporator coils and the old copper lines can be challenging, especially if the unit is enclosed within a closet. Depending on the setup, disconnection may require extra time and effort. Once removed, the new indoor evaporator coil and copper lines are installed.
Next, wiring is connected to both the disconnect box and the unit. A condensate drain line is added to facilitate moisture drainage from the indoor evaporator coil. After thorough checks to ensure nothing is overlooked, the breaker is switched on, supplying power to the unit. The system is then initiated and tested, running for 20 minutes to allow the coolant to circulate and begin cooling the air. Following consistent monitoring of system pressures and cooling performance, the installers tidy up and fit a locking cap on the outdoor unit before departing.